Alarm/Sensor - Samsung SNS-100/400 User Manual

- After setting is complete, click the Set button to apply the settings.
Note

4.2.8. Alarm/Sensor

This sets up necessary information when using alarm function by attaching sensor to network server.
For SNS-100
Alarm/Sensor Setup
◊ Digital In (Sensor) Setup
Item
Sensor Type Types of sensors are 'Normal open' and 'Normal close.' This selects up type of connected sensor.
◊ Digital Out (Relay / Alarm) Setup
Item
Relay Set up Relay Out responding when event is recognized by connected sensor or Motion Detection (MD)
Set up time to operate relay. It defines the period from the time when sensor detects event to the time when relay
Duration
is released.
In case event occurs by sensor or Motion Detection (MD) on the screen, decide whether transferring related
FTP
information to FTP.
In case event occurs by connected sensor or Motion Detection (MD) on the screen, decide whether transferring
E-mail
related information by e-mail.
FTP / E-mail Setup
Set up FTP server and e-mail information to which related information is transferred in case alarm occurs.
◊ FTP Setup
Item
FTP Server Name
Home Directory
FTP
User ID
User Password
For SNS-400
Enters the FTP server or Domain IP address.
Set up home directory to save relevant data at FTP server.
Enter ID to connect FTP server.
Enter PW to connect FTP server.
Description
Description
Description
4.2. Using Administration Page
27