ACTIVESMART™ OPERATING INSTRUCTIONS
Bottle holder (where fitted)
The bottle holders can be used to store a variety of bottles.
●
●
To position the bottle holder in your refrigerator, slot the back edge of the bottle holder
●
●
onto the back trim of any shelf in the fresh food compartment.
Unused bottle holders can be stacked up on top of one another so they do not take up
●
●
unnecessary shelf space.
Bottles are best stored with the neck of the beverage facing the front of the refrigerator.
●
●
Glass shelves
Standard glass shelves can not be repositioned in your refrigerator. Refer to 'Cleaning
●
●
and care' for details on how to remove the standard
glass shelves for cleaning.
Cantilever glass shelves — half-width and full-width
The cantilever glass shelves are designed to be
●
●
strong and versatile.
The half-width and full-width shelves are removable
●
●
and can be repositioned in your refrigerator.
Place the half-width shelves side-by-side when you
●
●
store large items such as platters.
Place the half-width shelves at different levels to
●
●
maximise the storage space when you store items of
varying heights.
To remove for repositioning
Hold the front and back edge of the shelf firmly
1
(refer to A).
Push the shelf up vertically to dislodge from back
2
support lugs (refer to B).
Slide the shelf towards you (refer to C).
3
Drip tray (Water dispensing models
only)
The drip tray is designed to fit into
●
●
the bottom of the water dispenser
panel.
To insert the tray ensure the rounded
●
●
sides are fitted into the dispenser
panel first.
The purpose of the tray is to capture
●
●
drips of water that may fall after
dispensing.
The tray can be removed for cleaning.
●
●
30
A
B
C
Drip tray