Installing your water filter (Ice & Water and Automatic Ice models)
Open your refrigerator and locate the
1
filter cover on the back wall, top right
of your refrigerator. Pull the tab at the
bottom of the cover towards you to
release (refer to A).
– The cover will slide down
upon release.
Note: We recommend removing the
top shelf if you need more space while
installing the filter.
Remove the plastic wrapping of the
2
new filter.
Insert the filter into the filter head
3
(refer to B).
Push the filter firmly all the way into the
4
filter head then turn the filter clockwise
until it locks into place (refer to C).
– If the filter will not turn, ensure
that the filter is pushed firmly into
the filter head.
Push the entire filter back into the
5
bracket (refer to D).
Push the cover up and into the slots at
6
the top of the filter housing until it clicks
and the base locks firmly into place
(refer to E).
12
INSTALLATION INSTRUCTIONS
A
C
E
B
D