Table of Contents
Advertisement
Before you start using the Ice & Water or Automatic Ice function
Before first use, you need to flush water through the filter to remove impurities or
trapped air in the water tank and filter system.
For Ice & Water
Press the water dispenser pad to dispense 4L of water.
●
●
– Wait for 4 minutes before dispensing again.
Dispense 4L of water and then wait for another 4 minutes.
●
●
– There may be carbon residue dispensed together with water. This is not harmful,
and is normal during the flushing process.
Dispense another 4L of water.
●
●
– This prevents excessive dripping of water from your dispenser.
There may be a few drips of water coming out of the dispenser for a few days after
●
●
installation. This is to clear the remaining trapped air in the dispenser.
Ensure your refrigerator has cooled for at least 2 hours before use.
●
●
For Automatic ice model
Press the
button to turn on the ice maker. The light above the button will illuminate
1
indicating the ice maker is on.
Press the
,
and
2
compartment to force an ice maker cycle. The ice tray will flip twice.
Repeat to force another ice maker cycle. The ice tray will flip twice and spill water into
3
the ice bin.
Empty the water, dry and return the bin. Be aware that the ice tray will not flip until the
4
refrigerator compartment door is closed.
Discard the first 3 harvests of ice (8 cubes per harvest).
5
INSTALLATION INSTRUCTIONS
buttons together for 4 seconds and then close the refrigerator
Water dispenser
(Ice & Water model only)
15
Hide quick links:
Advertisement
Table of Contents
