Care & Cleaning; Installing/Replacing The Filter In The Water Tank; Portafilter Cleaning - Breville BES870 Instruction Book

Care & Cleaning
INSTALLING/REPLACING THE FILTER
IN THE WATER TANK
1
Soak the water filter for Rinse filter & mesh
5 minutes
The water filter provided helps to prevent
scale build up which over time can affect the
performance of your machine, potentially
causing blockages and heating, problems
Replacing the water filter every two months
will reduce the need to de-scale the machine.
If you live in a hard water area, we recommend
you change the water filter more frequently.
Replacing The Water Filter
• Remove the filter from the plastic bag, and
soak in a cup of water for 5 minutes.
• Rinse the filter under cold running water for
5 seconds.
• Wash the stainless steel mesh in the plastic
filter compartment with water and assemble.
• Set the date dial 2 months ahead.
• To install, push down to lock into place.
The water filter can be removed from the water
tank during operation if not required.
NOTE
For replacement water filters contact Breville
Customer Service Centre on 1300 139 798
(Australia) or 0800 273 845 (New Zealand).
22
BES870_IB_F16.indd 22
2 3
Assemble
4 5
REPLACEMENT DUE
Set date 2 months ahead Install filter in water tank

PORTAFILTER CLEANING

Periodically run water through the machine
with the portafilter in place, but without any
ground coffee, to rinse out any residual coffee
particles.
6
Insert & lock water tank
16/06/2016 3:18 PM