The upper basket is designed to hold items like glasses, cups, saucers,
●
plates, small bowls and shallow pans.
Place larger utensils on or under the foldaway cup racks in the upper
●
basket. Ensure that knife blades are facing down and that light weight
items are weighted down or placed on the cupracks.
Removable spacing-adjustable tine rack
Designed to fit deep bowls (wide spacing) or small plates (narrow
●
spacing), depending on adjustment.
To adjust between wide and narrow spacings, slide the tines backward or
●
forward by pushing or pulling the handle at the front.
To adjust the tine spacing
To adjust between wide and narrow spacings, slide the tines backward or
●
forward by pushing or pulling the handle at the front.
Handle
Adjustable Foldaway Cup Racks
Use the cup racks to support mugs, cups and
●
glassware, and to secure large utensils and knives.
Adjust the height to suit the items stored on or
●
below the racks.
Fold the racks away if you need to make space for
●
taller items.
You can adjust these independently of each other to
any height:
1 Fold up to unlock the rack.
2 Adjust the height to suit by sliding up or down.
3 Fold down to lock in position.
Fold the racks away if you need the space.
●
Stemware
notches
These notches
help support
long-stemmed
1
Fold up to
unlock the rack
2
Adjust the height
to suit by sliding
up or down
3
Fold down to
lock in position
UPPER BASKET
Removeable spacing-
adjustable tine rack
If needed, remove
the rack to make
space for larger
items.
To remove the rack
Lift the rack up by the handle at the front
and slide out the hooks at the rear.
To replace the rack
Slot the hooks at the rear of the rack
onto the base of the basket and lower
the rack into place.
Adjusting the height of the Upper Basket
Adjust the height of the upper basket to create more space for tall
●
items in the lower basket.
You can adjust the height even when it is fully loaded, as you do not
●
have to remove it from the dishwasher.
If you are removing the basket fully, make sure that the runners are
●
aligned at the same height on both sides before re-inserting.
To lower the basket
Pull the lever up on one side and, without releasing it, carefully let the
●
basket drop down. Use the other hand to support the opposite side of
the basket, so that it doesn't drop suddenly and damage loaded dishes.
Repeat for the other side.
●
To lift the basket
Hold it on one side and carefully pull upwards until it clicks into place.
●
Repeat for the other side.
Note: you do not need to lift the levers up when raising the height of
●
the basket back up.
To lower the basket
To lift the basket
Use the lower basket for your
●
largest dishes: pots, pans, lids,
serving dishes and bowls.
Ensure dishware items do not
●
block the spray arm above
from rotating.
Place larger plates between
●
the longer tines to maximise
stability.
If you need more height for tall
●
items, you can raise the upper
basket.
See instructions opposite.
Front right cup
rack hidden for
illustration
Rack clips onto
basket wires
Loading the cutlery tray
The cutlery tray is designed to hold
●
cutlery and utensils (A).
Use the cutlery tray to securely hold long
●
or sharp items like knives, chopsticks or
ladles. Place larger utensils in the middle
section of the tray, and ensure that knife
blades are facing down.
Arrange cutlery items on their side using
●
the notches in the trays.
Slide side sections to the centre if you
●
need space for tall items below (B).
Loaded with cutlery
and utensils
A
Slide sections
across to clear
space for tall
glassware below
B
LOWER BASKET
Folding tine rack
Adjustable wine glass support racks
These tines can be folded down if you need
●
the space for pots or other large items.
Use to support wine glasses and
●
Release by pushing the small clips at the
stemware.
●
rear and fold the tine sections down towards
Adjust the height to suit the items
●
each other.
stored below the racks.
Fold the racks away if you need to
●
make space for taller items.
Folding
You can adjust these independently
tine racks
of each other to any height:
1 Fold up to unlock the rack.
2 Adjust the height to suit by sliding
up or down.
3 Fold down to lock in position.
Fold the racks away if you need the
●
space.
Release by pushing
the small clips at
the rear and fold the
tine sections down
towards each other
CUTLERY TRAY
Removeable Sections
To remove the side sections from
the main tray (C)
Slide the sections to the centre of
●
the tray.
Lift each section up from the centre
●
of the tray to unhook the runners,
then lift the section up and out.
To refit the side sections into the
main tray (D)
Refit the sections back into the
●
centre of the tray.
Slot the hooks at either end of the
●
section under the runners on the
front and back of the tray.
Align the edges of the section with
●
the runners and clip back into place.
C
D
Remove the Cutlery tray
To remove the cutlery tray
Gently pull the tray fully forwards and
●
lift it clear of the runners.
To replace the cutlery tray:
Place the tray back onto the runners
●
and click the rollers correctly into place.
Make sure that the runners are properly
●
aligned between the sets of rollers on
both sides of the tray.
Gently pull the tray fully forwards
End stop
Rollers
Runner
Lift the rollers clear of the end stops
and then the tray clear of the runners
591228 B / 0120501370C
10.17