Glossary - Jabra BT 620s User Manual

Industry Canada
Operation is subject to the following two conditions: (1) This device may not cause
interference and (2) This device must accept any interference, including interference
that may cause undesired operation of the device.
The term "IC:" before the certification/registration number only signifies that
registration was performed based on a Declaration of Conformity indicating that
Industry Canada technical specifications were met. It does not imply that Industry
Canada approved the equipment.
Bluetooth
The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use
of such marks by Jabra is under license. Other trademarks and trade names are those of
their respective owners.
12
15

Glossary

1 Bluetooth is a radio technology that connects devices, such as mobile phones and
headsets, without wires or cords over a short distance (approx. 30 feet). Get more
information at www.bluetooth.com.
2 Bluetooth profiles are the different ways that Bluetooth devices communicate with
other devices. Bluetooth phones support either the headset profile, the hands-free
profile or both. In order to support a certain profile, a phone manufacturer must
implement certain mandatory features within the phone's software.
3 Pairing creates a unique and encrypted link between two Bluetooth devices and lets
them communicate with each other. Bluetooth devices will not work if the devices
have not been paired.
4 Passkey or PIN is a code that you enter on your mobile phone to pair it with your
Jabra BT620s. This makes your phone and the Jabra BT620s recognize each other and
automatically work together.
5 Standby mode is when the Jabra BT620s is passively waiting for a call. When you
'end' a call on your mobile phone, the headset goes into standby mode.
6 A2DP (Advanced Audio Distribution Profile) is a Bluetooth Profile that enables
stereo sound. Both the headset and the device it connects to must support A2DP in
order to hear A2DP sound in the headset.
7 AVRCP (Audio Video Remote Control Profile) is a Bluetooth profile that enables
remote control of the device that the headset is connected to. Both the headset and
the device it connects to must support AVRCP in order for AVRCP to work.
13