Connecting The Cgy760R - FUTABA CGY760R Instruction Manual

Connecting The CGY760R

GX (Gyro) LED
LED
Solid red Normal operation.
Normal blinking (about 2 / sec): S.BUS data wait time.
Blinking
High-speed blinking(about 5 / sec): Backing up data.
green
Indicates an error has occurred. For example, the gyro is not func-
Blinking
tioning correctly. If normal operation does not return after cycling the
power off/on once again and/or replacing the battery, please contact
red
our customer service department.
RX (Receiver) LED
LED
Solid green Normal operation.
Solid red No signal reception
Unrecoverable failure (EEPROM,etc.)
Red and
Cycle the power off/on once again to return
Green turn on
to normal operation. If this is not successful,
alternately
please contact our customer service center.
(9) P.BOX:
• Connect to CGY760R when making settings.
When setting is completed remove it.
(10) Transmitter Connection Cable:
• Connect when using the transmitter to wirelessly transfer settings of
GPB-1 to CGY760R.
State
Never shut down during backup.
State
22
LCD
• Displays menus,
parameters.
Edit key
• Used to set operat-
ing parameters.