Canon iPF671 Service Manual page 55

Setting Item
[System Setup] [Show Job Log]
[Prep.MovePrinter]
[Admin. Menu] [Chg.Admin.Pswd]
[Init.Admin.Pswd]
[Printer Info] [Paper Info]
[Ink Info]
[Head Info]
[System Info]
[Error Log]
[Use Situation]
Description/Instructions
Selecting off prevents display of the log in Job Menu > Job Log. Additionally, the log is not
printed if you choose Job Menu > Print Job Log. Note that because job logs are not collected,
the Status Monitor accounting functions will not work correctly.
Select when moving the printer. Follow the instruction on the screen and perform the necessary
process.
This is not displayed when displaying a warning message about the amount remaining
maintenance cartridge.
Set a password to restrict displaying/setting of menus as follows. Allowed value is from 0 to
9999999.
- Allow only administrator to display/set
[IPv4]
[Change Password]
[Init.Admin.Pswd]
- Allow administrator to display/set and non-administrator to display only
[Interface Setup] (exclude [IPv4])
[Date & Time]
[Date Format]
[Time Zone]
[Use RemoteUI]
[Reset PaprSetngs]
[Save: Shared Box]
Press [OK] to return the [Administrator Menu] password to factory default.
Display the currently set paper type, size and printer settings.
Display ink levels and maintenance cartridge capacity.
Display the Printhead information.
Display the firmware version, serial number, and interface information.
Display the most recent error messages (up to 5).
Display the total area and duty counter printed.
Chapter 1
1-41