Canon iPF671 Service Manual page 302

Chapter 7
PARTS CNT.
COGFF
LF/SCALE
ADJUSTMENT VALUE
PV AUTO JUDGE
MULTI SENSOR
7-46
Print item
[Value of each parts Status
counter]
Number of days after set
Count
Life threshold
Usage
Cumulative count
CONDITION Cogging FF result
PITCHERR-F Pitch deviation in the forward path (FWD)
PITCHRR-B Pitch deviation of the return path (BWD)
PARAM0-F Parameters 1
PARAM0-B Parameters 2
PARAM1-F Parameters 1
PARAM1-B Parameters 2
MEDIA Type of paper that printed "PRINT INF"
LF-A User LF adjustment value A of the above
MEDIA (standard)
LF-B User LF adjustment value B of the above media
(low pass)
SCALE-A User scale adjustment value A of the above
media (fine scale)
SCALE-B User scale adjustment value B of the above
media (fast scale)
Ink reduction mode
Inrush number of times
UNIT Multi sensor version
DATA Multi sensor data
Print content
OK/W1/W2/E
Unit: Days
Unit: %
0: Disabled
1: Enabled
2: Check required
3: Adjust reruired
-400 to 400 (1/100000 mm)
REF: Motor error (6 digits)
PHASE: Phase (3 digits)
AMP: Amplitude (3 digits)
RATE: Decay rate (3 digits)
REF: Motor error (6 digits)
PHASE: Phase (3 digits)
AMP: Amplitude (3 digits)
RATE: Decay rate (3 digits)
REF: Motor error (6 digits)
PHASE: Phase (3 digits)
AMP: Amplitude (3 digits)
RATE: Decay rate (3 digits)
REF: Motor error (6 digits)
PHASE: Phase (3 digits)
AMP: Amplitude (3 digits)
RATE: Decay rate (3 digits)
LF adjustment value (up to 4 decimal places)
Scale adjustment value (integer)
ON (NORMAL/LOW only when ON)/OFF
*: NORMAL: normal mode, LOW: ink saving
mode
Inrush number of times (0 to 254)
*: Times that swiched from NORMAL (normal
mode) to LOW (ink saving mode)
Printed value