Table of Contents
Advertisement
Split single host mapping configuration
In the split single host mapping configuration, dual controllers inside a storage sled map to a single compute sled.
The following enclosure configurations support split single host mapping.
•
Four-bay chassis with two compute sleds—dual controllers inside a storage sled map to a half-width compute sled.
•
Four-bay chassis with one compute sled—dual controllers inside each storage sled map to the single half-width compute sled.
•
Three-bay chassis with one compute sled—dual controllers inside each storage sled map to the single full-width compute sled.
NOTE:
PowerEdge FX2s supports multiple split single host mapping configurations. You must select the desired configuration
based on your intended usage.
Figure 9. Split single host mapping configuration—four-bay chassis
Figure 10. Split single host mapping configuration—four-bay chassis (one compute sled)
Figure 11. Split single host mapping configuration—three-bay chassis
Split dual host mapping configuration
In the split dual host mapping configuration, dual controllers inside one storage sled are mapped to two different compute sleds.
NOTE:
PowerEdge FX2s supports multiple split dual host mapping configurations. You must select the desired configuration
based on your intended usage.
The following are examples of split dual host mapping configurations.
14
Storage sled mapping configurations
Advertisement
Table of Contents
Troubleshooting
