4
U
SING THE
Tips before operating your
camera
• You cannot activate the camera while on an active
call or while browsing files in the media gallery.
• Once the camera is active, the home screen acts
as the viewfinder.
• If you get a "Low memory" error on your
phone's screen, check your resolution and
quality compression settings. See "Setting up
the camera" on this page.
• If there is no activity within approximately
45 seconds after you turn your camera on,
then the camera quits and returns to the
previous launch point.
• Menu settings and options can only be accessed
when the camera is active.
Setting up the camera for photos
1.
With the flip open, select
2.
Options
Select
.
3.
Scroll left or right on the horizontal menu bar
using
.
4.
Settings
Select
.
5.
Scroll down to highlight an option and press
Flash
–
On, Off, or Automatic.
User Guide for the Kyocera Xcursion Phone
C
AMERA
→
Menu
Camera.
Resolution
–
240 (best for sending to email and
viewing), and 160 x 120.
Low Light Mode
–
low light environments.
Self Timer
–
or 10 second pauses. When set, the camera
beeps tones from 3 , 5 or 10 seconds down
to the time the shutter snaps the picture
automatically. Self Timer is not available
Multishot
when
Multishot
–
When set to On, the camera allows you to
take multiple pictures (up to six) while the
camera key is pressed and held. A tone plays
each time a picture is taken. A second tone
plays when the final picture is taken.
Shutter Sound
–
shutter closes while taking a picture.
White Balance
–
to whites. Useful feature for optimizing
picture taking in different light situations.
Options are Automatic, Fluorescent,
Incandescent, or Daylight.
Color Tone
–
Medium or High.
:
Quality
–
sets the picture compression.
The higher the compression, the better the
options are 640 x 480, 320 x
brightens the picture for
options are Off (default) or 3, 5,
mode is activated.
options are On or Off (default).
sets the sound used when the
allows the camera to adjust
allows the selection of Low tone,
19