Setting Sounds For Your Phone; Adjusting Volume - Kyocera Xcursion KX160A Manual

Setting sounds for your phone

You can set your phone to sound tones when you
open and close the flip, and when you turn the
phone on and off. Sounds will not occur during an
incoming call, if you are in a call, or if a headset
or car kit is attached to your phone.
Set sound when flip opens
→
1. Menu Settings
Select
Flip Open.
2.
Scroll through the list to hear the sounds.
3.
Select a sound and press
Set sound when flip closes
→
1. Menu Settings
Select
Flip Closed.
2.
Scroll through the list to hear the sounds.
3.
Select a sound and press
Set sound when phone powers on or off
→
1. Menu Settings
Select
Pwr On/Off Sound.
2. Enabled
Select . To deselect this sound,
Disabled
select .

Adjusting volume

You can adjust the earpiece, speakerphone,
and ringer volume as well as key tones.
User Guide for the Kyocera Xcursion Phone
→ →
Sounds
to save.
→ →
Sounds
to save.
→ →
Sounds
Adjusting the earpiece volume
To adjust the earpiece volume manually during
a call, press the
To set the earpiece volume:
→
1. Menu Settings
Select
Earpiece Volume
2.
Press right to increase the volume,
or left to decrease the volume.
3.
Press to select
Adjusting the ringer volume
→
1. Menu Settings
Select
Ringer Volume
.
2.
Press right to increase the volume,
or left to decrease the volume.
3.
Press to select
Adjusting speakerphone volume
→
1. Menu Settings
Select
Spkrphone Volume
2.
Press right to increase the volume,
or left to decrease the volume.
3.
Press to select
Adjusting key tone volume
You can change the volume of the tones the phone
makes when you press the keys.
→
1. Menu Settings
Select
Key Volume
.
key up or down.
→ →
Sounds
.
Save
.
→ →
Sounds
Save
.
→ →
Sounds
.
Save
.
→ →
Sounds
35