Connecting External Components; Connecting The Fm Antenna; Connecting An Optional Xm Satellite Radio Antenna - Samsung HT-Q45 Instruction Manual

Home theater system with 5 disc dvd changer
Hide thumbs Also See for HT-Q45:
Table of Contents

Advertisement

Connecting External Components

Connecting an External Digital / Analog Component
Example: Digital signal components such as a Set-Top Box or CD Recorder.
Analog signal components such as a VCR.
Audio Cable
(not supplied)
If the external analog
component has only one
Audio Out, connect either left
or right.
1
Connect the Digital Input (OPTICAL) to the Digital Output on the external digital component.
2
Connect AUX (Audio) In on the Home Theater to Audio Out on the external analog component.
Be sure to match connector colors.
3
Press AUX on the remote control to select 'DIGITAL IN / AUX1/AUX2' input.
Each time the button is pressed, the selection changes as follows: AUX1
You can also use the FUNCTION button on the main unit.
The mode switches as follows: DVD/CD
DIGITAL IN
The cooling fan supplies cool air to the unit to prevent overheating.
Cooling Fan
Please observe the following cautions for your safety.
Make sure the unit is well-ventilated. If the unit has poor ventilation, the temperature inside the unit could rise
and may damage it.
Do not obstruct the cooling fan or ventilation holes. (If the cooling fan or ventilation holes are covered with a
newspaper or cloth, heat may build up inside the unit and fire may result.)
19
You can connect the Video Output jack on your VCR to the TV, and connect the Audio
Note
Output jacks on the VCR to this product.
Optical Cable
(not included)
AUX2
DIGITAL IN
AUX1
AUX2
USB
FM
XM

Connecting the FM Antenna

FM Antenna (supplied)
1
Connect the FM antenna supplied to the FM 75Ω COAXIAL terminal.
2
Slowly move the antenna wire around until you find a location where reception is good, then
fasten it to a wall or other rigid surface.
This unit does not receive AM broadcasts.
Notes

Connecting an optional XM Satellite Radio Antenna

Connect the XM Antenna(Sold separately) to the XM Antenna Connector on the rear of this unit.
Notes
To ensure optimal reception of XM's satellite signal, the XM Antenna should be placed at or near a
southerly facing window with nothing obstructing its path to the sky. You can mount it indoors or outdoors.
When making connections, also refer to the operation instructions of the XM Antenna.
Depending on your location, the radio signal may be weak or cannot be tuned .
GB
20

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ht-q45t

Table of Contents