To Install The Chute Deflector And Chute Rotator Head; To Install The Chute Deflector Remote Control - Jonsered ST2261e Operator's Manual

2. Adjust the handle position to one of the mounting
holes (B) and tighten the handle knobs (C) with the
carriage bolts (D).
D
3. Install more carriage bolts (D) and handle knobs (C)
to secure the upper handle (A) to the lower handle
(E).
A
D
E
To install the chute deflector and
chute rotator head
1. Put the chute deflector assembly on top of the chute
base with the discharge opening to the front of the
product.
10
2. Put the chute rotator head (A) on the chute bracket
(B). If necessary, turn the chute assembly to align
the pins under the chute rotator head with the holes
in the chute bracket.
3. Put the chute rotator head on the pin (C) and the
threaded stud (D) of the mounting bracket (E).
4. Attach a locknut (F) on the threaded stud and
tighten.
B
C
5. Attach the rotator cable (H) to the lower handle with
the double clip (G).
C
To install the chute deflector remote
control
1. Attach the remote cable bracket (A) to the discharge
chute with a carriage bolt (B) and a 5/16-18 locknut
(D). Tighten the bolt.
A F
B
G
H
E D C
H
797 - 001 -