Samsung Sadt-110cm Installation Manual page 2

Summary
The Corner Mounted Adaptor (SADT-110CM) is used for the
installation of the Wall Mounted Adaptor (SADT-100WM) on the
corner of a building or other structure.
Precautions Before Installation
•
Make sure that the installation location can support the combined weights of the
Corner Mounted Adaptor, Wall Mounted Adaptor, Outdoor Housing and Smartdome
Camera (about 11 kg).
•
This product is designed to use M10 anchor nuts.
•
When installing the product on a concrete wall, use M10 anchor nuts together with plain
and spring washers.
•
Each anchor nut must be capable of withstanding an extraction force of 700 kg.
•
When installing the product outdoors, use interlocking devices made of stainless steel.
•
This goods should only be installed by a qualified technician using approved materials
and wiring practices in accordance with national, state, and local electrical code.
1
Installation
1 Select a location that will support four times the total
weight of the product to be installed (about 44 kg).
2 Use the Corner Mounted Adaptor to mark the eight
positions for installing the anchor nuts (M10), drill the
holes and install the anchor nuts. Then install the Corner
Mounted Adaptor with the appropriate bolts, plain and
spring washers.
3 Pull the cables out through the Corner Mounted Adaptor
and the Wall Mounted Adaptor.
1. Assemble the PG-13.5 cable gland on the Back Plate.
2. Pull the cables to the Wall Mounted Adaptor through the cable gland.
3. Assemble the Back Plate with six screws (FH M3 x L8).
CABLE GLAND
BACK PLATE
WALL MOUNT
ADAPTOR
CORNER MOUNT
ADAPTOR
2
GB