Troubleshooting; Blade Life; Battery Life - Panasonic ER-SB40 Operating Instructions Manual

Troubleshooting

Perform the following actions.
If the problems still cannot be solved, contact the store where
you purchased the unit or a service center authorized by
Panasonic for repair.
Problem
The power switch does
not turn ON.
The appliance has
become blunt.
Operating time is short.
Appliance stopped
functioning.
The blade gets hot.
The appliance cannot be
charged.
Makes a loud sound.
ER-SB40_CAN.indb 15
Action
Unlock the switch lock.
(See page 11.)
Until problems are solved, please
follow each procedure as follows;
1. Charge the appliance.
(See page 9.)
2. Clean the blade and apply oil.
(See pages 13 and 14.)
3. Replace the blade.
(See page 14.)
4. Have the battery replaced by
an authorized service center.
Insert the appliance plug into the
appliance firmly.
Apply oil. (See page 14.)
Confirm that the blade is properly
attached.

Blade life

Blade life varies according to the frequency and period of use of
the appliance.
For example, the blade life is approximately 3 years when using the
appliance for 5 minutes 10 times a month. Replace the blades if
cutting efficiency reduces substantially despite proper maintenance.

Battery life

Battery life will vary according to the frequency and length of use.
If the battery is charged once a month, the service life will be
approximately 3 years.
If the operating time is significantly shorter even after a full charge,
the battery has reached the end of its life.
15
2017/07/18 18:04:16