Samsung PPM50H2 Owner's Instructions Manual page 28

Frequency Adjustment
Preset:
• Press the RGB button to select the PC mode.
Press the Menu button. Move the joystick up or
1
down to select the SETUP, then press the joystick to
enter.
Move the joystick up or down to select the "Image
2
Lock", then move the joystick left or right to enter.
Move the joystick up or down to select the
3
"Frequency". Remove picture noise (vertical stripes)
on the screen by moving the joystick left or right.
(If frequency is not set properly, the vertical stripes
will appear on the screen.)
Press the Menu button to exit.
4
54
Fine Tuning (Phase)
Preset:
• Press the RGB button to select the PC mode.
Press the Menu button. Move the joystick up or
1
down to select the SETUP, then press the joystick to
enter.
Move the joystick up or down to select the "Image
2
Lock", then move the joystick left or right to enter.
Move the joystick up or down to select the "Phase".
3
Remove picture noise (vertical stripes) on the screen
by moving the joystick left or right.
(If phase is not set properly, the picture may be
blurry.)
Press the Menu button to exit.
4
55