Changing The Screen Size - Samsung PPM50H2 Owner's Instructions Manual

Changing the Location of the PIP Image
Press the Menu button. Move the joystick up or
1
down to select the "PIP", then press the joystick to
enter.
Quick way to access the PIP location: Just
press "Locate" on the remote control.
Move the joystick up or down to select the "Locate".
2
Move the joystick to move the PIP screen where you
3
want.
Press the Menu button to exit.
4
30

Changing the Screen Size

(When entering the Video mode)
When you press the Aspect button on the remote control, the PDP's screen mode should appear in
sequence. The screen displays in this order: Wide, Panorama, Zoom1, Zoom2, Stretch, 4:3.
Note
• If you watch a still image or the 4:3 mode for a long time, image may be burned onto the screen,
view the monitor in wide mode or panorama mode as possible.
Wide
Sets the picture to 16:9 wide mode.
Panorama
Use this mode for the wide aspect ratio of a
panoramic picture.
Zoom1
Magnify the size of the picture vertically on
screen.
Notes
• In VIDEO, S-VIDEO, Component1 mode, all screen modes can be selected.
(Wide Panorama Zoom1 Zoom2 Stretch
• In RGB mode, only Wide & 4:3 modes can be selected.
Zoom2
Magnify the size of the picture more than
Zoom1.
Stretch
Moves the Zoom2 picture up a little to fully
show the bottom. Use this picture size if you
want to view Zoom2 picture along with cap-
tions when watching movies.
Caption
4:3
Sets the picture to 4:3 normal mode. This is a
standard PDP screen size.
4:3).
31