Setting The Screen Burn Protection Timer - Samsung PPM42M8H Owner's Instructions Manual

Setting the Screen Burn Protection Timer

You can set the timer for Screen Burn Protection (hours, minutes).
If you start the operation to erase any residual image, the operation
will be performed for the set period of time and then automatically
finish.
1
Press the MENU (
Result: The main menu is displayed.
Press the ... or † button to select Function.
2
The Function menu is displayed.
Result:
3
Press the ENTER (
Press the ... or † button to select Screen Burn Protection.
4
Press the ENTER (
Press the ... or † button to select Timer.
5
Press the ENTER (
The Timer menu is displayed.
Result:
6
Press the ENTER (
Select On by pressing the ... or † button.
7
Press the ENTER (
Select the required option by pressing the ... or † button.
8
Result: The following options are available.
◆ Mode
: All White, Signal Pattern, Inverse,
Bar, Bar & Inverse
◆ Period
: Hour(1~24)
◆ Time
: Minute(1~30)
9
Press the EXIT button to exit.
) button.
) button.
) button.
) button.
) button again.
) button.
Screen Burn Protection
Pixel Shift
All White
Signal Pattern
Inverse
Bar
Bar & Inverse
Timer
Move Enter Return
Timer
Timer : Off
Off
Mode : Signal Pattern
On
Period : 1 Hour
Time : 30 min.
Move Enter Return
Timer
Timer : On
Mode : Signal Pattern
All White
Period : 01 Hr.
Signal Pattern
Time : 05 min
Inverse
Bar
Bar & Inverse
Move Enter Return
Timer
Timer : On
Mode : All White
▲
Period : 01
01
▲
Time : 30 min.
Move Enter Return
Timer
Timer : On
Mode : All White
Period : 1 Hour
▲
Time : 30
30
▲
Move Enter Return
English - 31