Storing Channels In Memory (Automatic Method) - Samsung LTM 295W Owner's Instructions Manual

O
P E R AT I O N

Storing Channels in Memory (Automatic Method)

1
First, select the correct
signal source (ANT, STD,
HRC, IRC). See steps 1~4
on previous page.
Press the MENU button.
Press the CH button to
select "Channel", then
press the VOL + button.
2
Press the CH button to
select "Auto program".
3
Press the VOL + button.
The TV will begin memo-
rizing all of the available
channels and display
them in the PIP window.
4
After all the available channels are stored, the Auto program
menu reappears. Press the MENU button to exit the menu.
ENG 3.4
The TV automatically cycles
through all of the available channels
and stores them in memory. This
takes about one to two minutes.
Press VOL+ at any time to interrupt
the memorization process and return
to the CHANNEL menu.