Table of Contents
Advertisement
I
N S TA L L AT I O N
Connecting a Camcorder
The jacks on your TV make it easy to connect a camcorder. They allow you to view the
camcorder tapes without using a VCR. (Also see "Viewing a VCR or Camcorder Tape" on
page 3.17)
1
Locate the A/V output
jacks on the camcorder.
They are usually found on
the side or back of the
camcorder.
2
Connect a set of audio
cables between the
AUDIO OUTPUT jacks on
the camcorder and the
AUDIO jacks on the
TV.
3
Connect a video cable
between the VIDEO
OUTPUT jack on the
camcorder and the
VIDEO jack on the TV.
The audio-video cables shown here are usually included with a Camcorder. (If not, check
your local electronics store.) If your camcorder is stereo, you need to connect a set of two
cables.
ENG 2.9
Advertisement
Table of Contents
