Connecting To A Cable Box That Descrambles All Channels .2.3; Connecting To A Cable Box That Descrambles Some Channels - Samsung LTM1555B Owner's Instructions Manual

I
N S TA L L AT I O N
Connecting to a Cable Box that Descrambles All Channels
1
Find the cable that is
connected to the
ANTENNA OUT terminal
on your cable box.
2
Connect the other end of
this cable to the TV
ANTENNA terminal on
the back of the TV.

Connecting to a Cable Box that Descrambles Some Channels

If your cable box descrambles only some channels (such as premium channels), follow the
instructions below. You will need a two-way splitter, an RF (A/B) switch, and four lengths of
coaxial cable. (These items are available at most electronics stores.)
1
Find and disconnect the
cable that is connected
to the ANTENNA IN
terminal on your
cable box.
2
Connect this cable to a
two-way splitter.
3
Connect a coaxial cable
between an OUTPUT ter-
minal on the splitter and
the IN terminal on the
cable box.
"ANT OUT," "VHF OUT," or simply,
"OUT."
"ANT IN," "VHF IN," or simply,
"IN."
2.3
This terminal might be labeled
This terminal might be labeled