Connecting Cable Tv; Cable Without A Cable Box; Connecting To A Cable Box That Descrambles All Channels; Connecting To A Cable Box That Descrambles Some Channels - Samsung LN-R238W Owner's Instructions Manual

C
O N N E C T I O N S

Connecting Cable TV

To connect to a cable TV system, follow the instructions below.

Cable without a Cable Box

1
Plug the incoming
cable into the
ANT IN terminal
on back of the TV.

Connecting to a Cable Box that Descrambles All Channels

1
Find the cable that is
connected to the
ANT OUT terminal
on your cable box.
ANT IN
2
Connect the other end
of this cable to the
ANT IN terminal on
the back of the TV.

Connecting to a Cable Box that Descrambles Some Channels

If your cable box descrambles only some channels (such as premium channels), follow the
instructions below. You will need a two-way splitter, an RF (A/B) switch, and four lengths
of RF cable. (These items are available at most electronics stores.)
1
Find and disconnect
the cable that is
connected to the
ANT IN terminal
on your cable box.
Because this TV is cable-ready,
you do not need a cable box to
view unscrambled cable channels.
This terminal might be labeled
"ANT OUT", "VHF OUT" or
simply, "OUT".
ANT OUT
This terminal might be labeled
"ANT IN", "VHF IN" or simply, "IN".
ANT IN
9
English-