Adding And Erasing Channels (Manual Method); Changing Channels; Using The Channel Buttons; Directly Accessing Channels - Samsung LTM 225W Owner's Instructions Manual

07.CHAPTER3_EN 2/5/03 12:34 AM
O

Adding and Erasing Channels (Manual Method)

1
Use the number buttons to directly select the channel that will be added or
erased.
2
Press the ADD/ERASE button.
Repeatedly pressing this button will alternate between "Added" and "Erased."
You can view any channel (including an erased channel) by using the number
buttons on the remote control.

Changing Channels

Using the Channel Buttons

1
Press the CH
When you press the
You will see all the channels that the TV has memorized. (The TV must have
memorized at least three channels.) You will not see channels that were either erased
or not memorized.

Directly Accessing Channels

Use the number buttons to quickly tune to any channel.
1
Press the number buttons to go directly to a channel.
For example, to select channel 27, press "2,"then "7." The TV will change
channels when you press the second number.
When you use the number buttons, you can directly select channels that were
either erased or not memorized.
To select a channel over 100, press the +100 button.
(For channel 122, press "+100," then "2," then "2.")
To change to single-digit channels (0–9) faster, press "0" before the
single digit. (For channel "4," press "0," then "4.")

Using the Pre-CH Button to select the Previous Channel

1
Press the PRE-CH button.
The TV will switch to the last channel viewed.
To quickly switch between two channels that are far apart, tune to one channel, then
use the number button to select the second channel. Then, use the PRE-CH button
to quickly alternate between them.
Page 7
P E R AT I O N
/ buttons to change channels.
buttons, the TV changes channels in sequence.
CH /
3.7
C T : TV O
HAPTER HREE PERATION