Adding And Erasing Channels (Manual Method); Changing Channels; Using The Channel Buttons; Directly Accessing Channels - Samsung LTM1575W Owner's Instructions Manual

OPERATION
]
Adding and Erasing Channels (Manual Method)
Use the number buttons to directly se!ept the channel that will be added O r eEased,
Press the ABD/EP.ASE button,
Repeatedly pressing this button wiII alternate between "Added" and" Erased,"
You can view any channel (including an erased channel) by using the number
buttons on the £eiilote control
Changing Channels
Using the Channel Buttons
Pressthe CH• or CHV buttonsto changechannels.
When you press the CH • or CH • buttons, the TV changes channels in
sequence. You will see all the channels that the TV has memorized. (The TV
must have memorized at least three channels.) You will not see channels that
were either erased or not inemorized.
Directly Accessing Channels
Use the number buttons to quickly tune to any channel.
Press the number buttons to go directly to a channel
For example, to select channel 27, press "2," then _7: The TMwill change channela
when you Press the second namber.
When you use the number buttons, you can directly select channels that were
either erased or not flleiilorized.
To select a channel over 100, press the +100 button. (For channel 122, press
"+100,"
then "2," then "2.")
To change to single-digit channels (0 9) faster, press "0" before the
single digit. (For channel "4," press "0," then "4.")
Using the Pre-CH Button to select the Previous Channel
Press the PRE-CHbutton,
The TV will switch to the last channel viewed.
To quickly switch between two channels that are far apart, tune to one channel,
then use the number button to select the second channel. Then, use the PRE-CH
button to quicMy alternate between thenL
37
(]l_k}'lll ]HI I: IV ()I']}/411()N