Husqvarna T435 Operator's Manual page 3

9. Starter rope handle
10. Front handle
11. Chain oil tank
12. Oil pump adjustment screw
13. Air purge bulb
14. Choke
15. Throttle trigger lockout
16. Throttle trigger
17. Start/stop switch
18. Guide bar
19. Saw chain
20. Bar tip sprocket
21. Belt eyelet
22. Rope eyelet
23. Clutch cover
24. Product and serial number plate
25. Chain tensioning screw
26. Chain catcher
27. Spiked bumper
28. Operator's manual
29. Transportation guard
30. Combination wrench
31. Screwdriver
32. Air filter
33. Bar nut
34. Vibration damping system, 3 units
35. Brake band
Symbols on the product
Be careful and use the product correctly.
This product can cause serious injury or
death to the operator or others.
Read the operator's manual carefully and
make sure that you understand the
instructions before you use this product.
Always wear approved protective helmet,
approved hearing protection and eye
protection.
This product complies with applicable EC
Directives.
Noise emission to the environment complies
with applicable EC Directives. The noise
emission of the product is specified in
Technical data on page 29 and on the
label.
Chain brake, engaged (right). Chain brake,
disengaged (left).
733 - 002 -
Air purge bulb.
Adjustment of the oil pump.
Fuel.
Chain oil.
Both of the operator's hands must be used
to operate the chainsaw.
Never operate the chainsaw holding it with
one hand only.
Never let the guide bar tip come in contact
with any object.
Warning! Kickback may occur when the
nose or tip of the guide bar touches an
object, and cause a lightning fast reverse
reaction, kicking the guide bar up and
towards the operator. May cause serious
personal injury.
Use appropriate protections for foot-leg and
hand-arm.
yyyywwxxxx
This chainsaw should only
be used by persons who
are specially trained in
tree maintenance work.
See operator's manual!
Work position.
Choke.
The rating plate shows se-
rial number. yyyy is the
production year and ww is
the production week.
3