Memorizing The Channels; Selecting The Video Signal-Source - Samsung LTM 1525 Owner's Instructions Manual

Tft-lcd television

Hide thumbs Also See for LTM 1525:

Table of Contents

P E R AT I O N

Memorizing the Channels

Your TV can memorize and store all of the available channels for both "off-air" (antenna)

and cable channels. After the available channels are memorized, use the CH L and

CH M buttons to scan through the channels. This eliminates the need to change channels

by entering the channel digits. There are three steps for memorizing channels: selecting a

broadcast source, memorizing the channels (automatic) and adding and deleting channels

(manual).

Before your television can begin memorizing the available channels, you must specify the

type of signal source that is connected to the TV (i.e., an antenna or a cable system).

Press the MENU button to

display the menu.

Press the CH M button to

select "Channel", then

press the VOL + button.

Repeatedly press the

VOL + button to cycle

through these choices:

ANT (antenna), STD, HRC

or IRC (all cable TV).

Note: STD, HRC and IRC identify various types of cable TV

systems. Contact your local cable company to identify the type

of cable system that exists in your particular area.

At this point the signal source has been selected. Proceed to

"Storing Channels in Memory" (next page).

ENG 3.5

Table of Contents