Table of Contents
Advertisement
I
N S TA L L AT I O N
4
Connect a coaxial
cable between the
ANTENNA OUT termi-
nal on the cable box
and the B–IN terminal
on the A/B switch.
5
Connect another cable
between the other
OUT terminal on the
splitter and the A–IN
terminal on the RF
(A/B) switch.
6
Connect the last coax-
ial cable between the
OUT terminal on the RF
(A/B) switch and the
VHF/UHF terminal on
the rear of the TV.
After you've made this connection, set the A/B switch to the "A" position for normal viewing.
Set the A/B switch to the "B" position to view scrambled channels. (When you set the A/B
switch to "B," you will need to tune your TV to the cable box' s output channel, which is usu-
ally channel 3 or 4.)
ENG 2.4
Advertisement
Table of Contents
