Advertisement
iR ADV C5500 series Advance Maintenance Guide
Procedure
M1
Clean DADF Rollers /
Sensors
Do not use alcohol to clean the
rollers. Use water, roller
cleaner or soap and water.
M2
Clean the Glass/Platen
roller
Detail & Action
Clean the rollers ( Pick up, Feed, Sep)
Clean
1.
Copy Glass
2. ADF Reading Glass
4.
2
nd
Side Glass
3
2
1
Note
Point:
Clean the Rollers using a lint free cloth with soap
and water. Sensors should be cleaned using a
blower
brush.
*Visually Inspect the Rollers and only clean if
necessary. If the Rollers were recently replaced
or cleaned they may be fine
Point:
3. Platen
1. If the 2
nd
side Glass in ADF is dirty or there are
4
a lot of Alarm codes for this Glass (Alarm code:
020021), take out the 2
both side of it.
2. Remove and clean the under side of the Copy
Glass and clean the Optics
3. Clean the ADF Reading Glass and Copy Glass
with Oil cleaner (FY9-6020-000)
4. Clean the Platen Roller with Alcohol.
Time
Clean
5
min
Clean
nd
side glass and clean
4
min
[TP12 181]
Advertisement
