Selecting An External Signal - Samsung HP-P5031 Owner's Instructions Manual

Selecting an External Signal

You can use PIP to view a signal from an external source, such as a VCR.
Press the MENU button. Press the ▲ or ▼ button to
1
select "Picture", then press the ENTER button.
Press the ▲ or ▼ button to select "PIP", then press
2
the ENTER button.
Press the ▲ or ▼ button to select "Source", then
3
press the ENTER button.
Press the ▲ or ▼ button to cycle through all of the
4
available signal sources:
"TV", "AV1", "AV2", "S-Video", "Component1",
"Component2", "PC" and "DVI".
The signal from these inputs will not appear if you
have not connected any equipment to the PDP's
respective input jacks.
Press the MENU button to exit.
5
Note
• The PIP function operates in Wide screen.
• Using Multi-Screen in the Normal (4:3) or Zoom screen will change the size of the main screen to
Wide screen.
50
TV Picture
Mode : Custom
Custom
Color Tone : Normal
Color Control
Film Mode : Off
Size : 16:9
PIP
† More
Move Enter
PIP
TV
PIP : On
Source : TV
Swap
Size :
Position :
Air/CATV : Air
Channel : 4
Sound Select : Main
Move Enter
TV PIP
PIP : Off
Source : TV
Swap
Size :
Position :
Component1
Air/CATV : Air
Channel : 22
Component2
Sound Select : Main
Move Enter
TV PIP
PIP : Off
Source : TV
Swap
Size :
Position :
Air/CATV : Air
Channel : 4
Sound Select : Main
Move Enter
√
√
√
√
√
√
√
Return
√
√
√
√
√
√
√
√
Return
TV
AV1
AV2
S-Video
†
Return
...
PC
DVI
Return