Selecting An External Signal - Samsung HP-S4253 Owner's Instructions Manual

Selecting an External Signal

You can use PIP to view a signal from an external source, such as a VCR.
Press the MENU button. Press the ▲ or ▼ button to select
1
"Picture", then press the ENTER button.
Press the ▲ or ▼ button to select "PIP", then press the
2
ENTER button.
Press the ▲ or ▼ button to select "Source", then press
3
the ENTER button.
Press the ▲ or ▼ button to cycle through all of the
4
available signal sources:
"TV", "AV1", "AV2", "S-Video1", "S-Video2",
"Component1", "Component2", "HDMI1", or "HDMI2".
The signal from these inputs will not appear if you
have not connected any equipment to the TV's
respective input jacks.
Press the EXIT button to exit.
5
Notes
• The same source cannot be selected on both the main and sub screens. However, the same source
can be selected on both the main and sub screens for TV.
• PC is not available in PIP picture.
T V Picture
Mode : Dynamic
Size : 16:9
Digital NR : On
DNIe : On
Film Mode : Off
Blue Screen : Off
PIP
Move Enter
T V PIP
PIP : On
Source : TV
Swap
Size :
Position :
Channel : Air 3
Move Enter
T V PIP
TV
PIP : On
AV1
Source : TV
AV2
Swap
S-Video1
Size :
S-Video2
Position :
Component1
Component2
Channel : Air 3
HDMI1
HDMI2
Move Enter
√
√
√
√
√
√
Return
√
√
√
√
√
Return
Return
59