Auto Wall-Mount (Sold Separately) (Depending On The Model) - Samsung BN68-01780A-00 User Manual

Auto Wall-Mount (Sold separately) (depending on the model)

Once the auto wall mount is installed, your tV's position can be easily adjusted.
SERVICE Cable (Not supplied)
Entering the menu
1. Press the ▲, ▼, ◄ or ► button on your remote control.
➣
The Auto Wall-Mount screen is displayed.
➣
If the Auto Wall-Mount screen is not displayed when
clicking on a direction button while watching your TV, use
the menu to display that screen.
• Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the
ENtER button.
• Press the ▲ or ▼ button to select "Auto Wall-Mount", then
press the ENtER
Remembering the Position
. Adjust to the desired position using the ▲,▼,◄,► buttons.
➣
If you press an arrow button when no OSD is displayed on
the TV screen, the Adjustment screen appears.
➣
Press the INFO button to reset. Press the ◄ or ► button to
select "Yes", then press the ENtER
The position is initialized to the default setting.
. Press the blue button.
Press the ▲ and ▼ buttons to select a save mode from either
Position 1, Position 2 or Position 3 in order to save the current
position.
➣
To not save the current position, press the REtURN button.
➣
When selecting a save mode, you cannot use the Colour
buttons.
. Press the ENtER
➣
When Position1 is selected, the message "Current position
saved as Position1" is displayed.
. Press the ENtER
➣
The saved Position appears on the left side of the OSD.
tV Rear Panel
button.
button to save.
button.
button.
English - 
Auto Wall-Mount
TV VCR DVD
Setup
tV
Plug & Play
Language : English
time
Cable Network Setup
Light Effect : In Watching tV 
Auto Wall-Mount
Melody : Off
sMore
Move Enter
Auto Wall-Mount
Position 1 
Adjust Save
Save
Select a mode to Save.
Position1
Position
SET RESET
Position
Move Enter Return
STB






Return

Centre
INFO