Setting up the tV with your PC
➣
Press the SOURCE button to select PC mode.
1. Press the MENU button to display the menu.
Press the ENtER
. Select the required option by pressing the ▲ or ▼ button,
then press the ENtER
. When you are satisfied with your setting, press the ENtER
button.
. Press the EXIt button to exit.
♦
Auto Adjustment
Auto adjustment allows the PC screen of set to self-adjust to
the incoming PC video signal. The values of fine, coarse and
position are adjusted automatically.
Easy Setting
1. Press the tOOLS button on the remote control.
. Press the ▲ or ▼ button to select "Auto Adjustment", then
press the ENtER
♦
Screen Adjustment:
Coarse/Fine
The purpose of picture quality adjustment is to remove or reduce
picture noise. If the noise is not removed by Fine-tuning alone,
then adjust the frequency as best as possible (coarse) and Fine-
tune again. After the noise has been reduced, readjust the picture
so that it is aligned on the center of screen.
Press the ▲ or ▼ button to select "Coarse" or "Fine", then press
the ENtER
button.
Press the ◄ or ► button to adjust the screen quality.
Press the ENtER
Position
Adjust the PC's screen positioning if it does not fit the TV screen.
Press the ▲ or ▼ button to adjusting the Vertical-Position.
Press the ◄ or ► button to adjust the Horizontal-Position.
Press the ENtER
Image Reset
You can replace all image settings with the factory default
values.
button, to select "Picture".
button.
button.
button.
button.
English -
tV
Picture
Mode
: Standard
backlight
Contrast
brightness
Sharpness
Auto Adjustment
Screen Adjustment
Detailed Settings
sMore
Move
Enter
Auto Adjustment in progress
Please wait.
tools
Anynet+ (hDMI-CEC)
Picture Mode
:
Standard
Sound Mode
:
Custom
Sleep timer
:
Off
SRS tS Xt
:
Off
Energy Saving
:
Off
PIP
Auto Adjustment
Move
Enter
tV
Screen Adjustment
Coarse
Fine
Position
Image Reset
Move
Enter
tV
Position
Move
Enter
tV
Screen Adjustment
Coarse
Fine
Position
Image Reset
Move
Enter
9
0
Return
Exit
0
9
Return
Return
0
9
Return