Mask And Tubing Setup - ResMed S9 Elite Clinical Manual

Mask and tubing setup

• For more information on assembling the mask see the mask user guide.
• If your patient is using a full face mask ensure that the "Full Face" setting is selected. If your patient
is using a nasal pillows mask ensure that the "Pillows" setting is selected. If your patient is using a
nasal mask ensure that the "Nasal" setting is selected with the exception of the Ultra Mirage mask
which should use the "Nasal Ultra" setting.
• For a complete list of recommended masks and their settings go to www.resmed.com on the
Products page under Service & Support. If you do not have internet access, please contact your
ResMed representative.
• The S9 device is compatible with the following tubing:
Tube
SlimLine
Inner diameter:
Standard
Inner diameter:
ClimateLine
Inner diameter:
ClimateLine
MAX
Inner diameter:
Specifications
Length: 1.8 m
15 mm
Length: 2 m
19 mm
Heated
Length: 2 m
15 mm
Heated
Length: 1.9 m
19 mm
Settings
Default setting
If using the standard tubing, adjust the tube setting in
the Patient Setup or Clinical Setup menus.
Automatically detected
Automatically detected
11
English