Maintenance; Cleaning The Exterior - EdgeStar AP13500G Owner's Manual

Sleep
Pressing the Sleep button on the remote will turn Sleep mode on or off. The Sleep Mode can
be activated when in Cool Mode and will not operate when in Fan Mode. When operating in
Cool Mode, the Sleep function will slowly raise the Temp Control by 4° Fahrenheit over the
initial 2 hour Sleep Mode period. When the Sleep Mode is active, the LCD will continue to
display the Sleep Mode status.
X-Fan
The X-Fan mode will operate the indoor fan at low speed to remove any residual moisture
through the exhaust hose. The X-Fan mode is available in COOL or DRY modes only. After
the unit has been turned off, the X-Fan function may continue to operate for up to 10 minutes
in order to dissipate any moisture collected in the unit.
Turbo
The Turbo function sets the unit into an accelerated mode that enables the unit to reach the
desired temperature setting in a shorter amount of time. Pressing the Turbo button will activate
/ deactivate the Turbo function.

Maintenance

Clean the air conditioner and filters regularly to maximize performance and efficiency, and to
prolong the unit's life. Be sure to always unplug the air conditioner from the power outlet before
cleaning.

Cleaning the Exterior

Use a soft dry cloth to wipe the body of the air conditioner clean. If necessary, use lukewarm
water to dampen a cloth to clean the unit.
Use a soft bristle brush to clean between the vents.
Never use abrasive chemicals, volatile substances, gasoline, detergents, chemically treated
cloths, or other cleaning solvents that may damage the cabinet exterior.
Warning: Never spray water directly on the unit.
21