List of Parts Once you have unpacked your PDP with WIRELESS HOME AV CENTER, Accessories check to make sure that you have all the parts shown here. If any piece is missing or broken, call your dealer. Remote Control/ Antenna Cable...
Your PDP has a simple, easy-to-use menu system that appears on the PDP screen. This system makes it convenient and fast to use features on the PDP. Your PDP also lets you display the status of many of your PDP’s features.
Page 3
(as illustrated). Connect the Wireless Signal cable from the WIRELESS SIGNAL INPUT Video Signal and Audio/Control ports on the rear of the PDP to the A/V SIGNAL Port on the bottom of the WIRELESS AV RECEIVER.
Connect the Video/Audio cables between the VIDEO or S-VIDEO / L - AUDIO - R jacks to the WIRELESS HOME AV CENTER and VIDEO or S-VIDEO / L - AUDIO - R output jacks on the VCR. (Note: For better video, use an S-Video cable.) Please be sure to match the color coded input terminals and cable jacks.
Connecting a Camcorder WIRELESS HOME AV CENTER Connect a Video/Audio cable between the VIDEO or S-VIDEO / L - AUDIO - R jacks to the WIRELESS HOME AV CENTER and the VIDEO or S-VIDEO / AUDIO output jacks on the camcorder.
When you want to connect DTV satellite receiver or DTV cable receiver to the component jack ● on the WIRELESS HOME AV CENTER, please use Lt and Rt jacks for audio input instead of using DIGITAL AUDIO INPUT (OPTICAL). Connecting a Digital Audio System WIRELESS HOME AV CENTER If your audio system has a coaxial digital audio input, connect to the “COAXIAL”...
Connecting to a second TV WIRELESS HOME AV CENTER Connect the Video/Audio cables between TV out / L - AUDIO - R jacks on the WIRELESS HOME AV CENTER to VIDEO / L - AUDIO - R input jacks on the second TV.
Select an option and then press the Enter button. If you are connected to an antenna (Air), leave “Air” displayed. If you are connected to a cable, press the ▲ or ▼ button to display the type of cable system “STD”, “HRC” or “IRC”. Move...
Remote Control Buttons Œ POWER ON button Turns the PDP and WIRELESS HOME AV CENTER on. You have to turn on the PDP and the WIRELESS HOME AV CENTER respectively. ´ ANTENNA button Alternates the input between Air and Cable.
Troubleshooting If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips apply, then call your nearest Samsung authorized service center. WIRELESS HOME AV CENTER Problem Poor picture quality Poor sound quality or no sound.
Page 11
Possible Solution Solution 1: Turn on the PDP set and then turn on the AV Center as they have separate power supplies. Solution 2: Check if AV Receiver’s LED at the top of PDP set and the AV Center’s wireless LED are ON and green.
Page 12
Possible Solution Solution: AV Center cannot handle the Audio Mode except AC-3. Switch the input to AC-3, or alternatively select Set-Up in the Menu, move to Sound In/Out then switch Digital Input to Lt/Rt. Note: Digital Audio inputs except AC-3 might cause a severe damage to the system.