Table of Contents
Advertisement
Select language
You can select the LCD display language between english, german, etc.
1. Press Menu, then press System Setup on the one-touch keypad.
The display shows 'RINGER VOLUME ?'.
2. Press " or ❷ until you find 'SELECT LANGUAGE ?', then
press Start/Enter.
3. Press " or ❷ to choose the desired display language, then
press Start/Enter. You can also press the number of the language in the
display.
4. The display shows the next setup menu. To return to standby mode,
press Stop.
Econo mode setting
To get the most from your toner supply, set the econo mode to on. If set to
on, you can preserve the toner supply. The print quality may be reduced.
1. Press Menu, then press System Setup on the one-touch keypad.
The display shows 'RINGER VOLUME ?'.
2. Press " or ❷ until you find 'ECONO MODE SETTING ?', then
press Start/Enter.
3. The display asks you to set the mode to ON or OFF. Press 1 to set ON, or
2 to set OFF.
4. The display shows the next setup menu. To return to standby mode,
press Stop.
Setting up your machine
1.21
Advertisement
Table of Contents
