Technical Data; Preparing The Machine; Water Renewal - Wega EMA Use And Maintenance Manual

4.2

Technical data

The nameplate of the machine is fixed on the
base of the frame under the drain pan.
The data of the appliance can be seen also on
the label located on the package of the machine.
Power supply voltage
Absorbed power
Steam boiler capacity
Safety valve calibration (bar)
Boiler operating pressure
Feedwater pressure
Coffee dispensing pressure
Operating conditions
Technical data table
5

Preparing the machine

The preparation of the machine and the instal-
lation operations must be carried out by qualified
personnel only. The installer must strictly follow the
indications provided in chapter "Warnings for the
Installer".
Using the machine without all the installation
i
operations having been carried out by technical
personnel could damage it seriously.
User manual
JUN
120-230 120-230
V
240 240-400
2.300
2.300
W
3.000
3,5 / 0.92 5 / 1.32
L / gal UK
bar / psi
bar / psi
bar / psi
bar / psi
°C / °F
1GR COMPATTA
120-230 120-230
240-400 240-400
3.000
3.000
7 / 1.85 12 / 3.17
1.9 / 27.6
0.8-1.4 / 11.6-20.3
1.5-5 (MAX) / 21.8-72.5 (MAX)
8-9 / 116-130.5
5-40 / 41-104
6

Water renewal

In case of breaks longer than 1 week, it is neces-
sary to perform the changing of the 100% of the
water contained in the hydraulic circuits of the ma-
chine, by using the appropriate dispensing points,
as described in the paragraph "Installation report".
Technical data plate
2GR 3GR
120-230
240-400
3.700
5.300
3.900
17 / 4.49
4GR
230-240
400
6.300
22 / 5.81
37