Channel Add/Delete; Rf Output Channel - Samsung DVD-VR355 Instruction Manual

DVD-Recorder

Channel Add/Delete

No Disc
Timer Rec.
Select channel : 1
Setup
Add Delete
NUMBER ENTER RETURN
0~9
DVD-Recorder
Channel Add/Delete
No Disc
Timer Rec.
Select channel : 11
Setup
Channel is added.
Add Delete
NUMBER ENTER RETURN
0~9
DVD-Recorder
Channel Set
No Disc
Timer Rec.
Antenna/Cable TV : Antenna
Setup
Auto Channel Memory
Channel Add/Delete
CH3

RF Output Channel

: CH3
CH4
MOVE ENTER RETURN EXIT
Channel Add/Delete
Use this feature if Auto Channel Memory missed a channel that you
would like to add or if you wish to remove a channel.
1. With the unit in Stop mode/No Disc mode, press the MENU button.
2. Press the ▲▼ buttons to select Setup, then press the ENTER or ►
button.
3. Press the ▲▼ buttons to select Channel Set, then press the ENTER
or ► button.
EXIT
4. Press the ▲▼ buttons to select Channel Add/Delete, then press the
ENTER or ► button.
5. Press the ▲▼ or number buttons to select the channels you want to
add or delete on the Select channel screen. Then, press the ENTER
button.
• Using CH/TRK (
to add/delete one channel at a time.
• Using ▲▼ buttons for channel selection jumps to the next channel
memorized in Auto Channel Memory.
EXIT
6. Press the ◄► buttons to select Add or Delete, then press the ENTER
button.
RF Output Channel
When you connect the DVD Recorder & VCR to your TV with the RF
Antenna Cable, follow the steps below to set the RF Output Channel.
►
► 1. With the unit in Stop mode/No Disc mode, press the MENU button.
►
2. Press the ▲▼ buttons to select Setup, then press the ENTER or ►
►
button.
3. Press the ▲▼ buttons to select Channel Set, then press ENTER or ►
button.
4. Press the ▲▼ buttons to select RF Output Channel, then press the
ENTER or ► button.
5. Press the ▲▼ buttons to select CH3 or CH4, then press the ENTER or
► button.
The message "Please tune your TV to channel 3 (4)" will appear on
the screen. Change your TV channel to CH3 or CH4 to match the RF
Output Channel of the DVD Recorder & VCR.
English - 31
/ ) buttons for channel selection allows the user