Setting The Dvd-Vcr Output Channel; Selecting The Colour Mode; Nicam; Intelligent Picture Control - Samsung SV-DVD440 User Manual

Setting the DVD-VCR Output
Channel
Your DVD-VCR output channel may need to be
changed if the pictures suffer from interference or if
your TV cannot find the pictures.
Also, you can change the DVD-VCR output channel to
adjust the frequency in which information is displayed
on the screen.
❿
1
After pressing the MENU, press the OK or .
Result: The Setup menu is displayed.
2 ,
Press the corresponding ❷ buttons to select
the Install option.
❿
3 Press the OK or to select this option.
Result: The Install menu is displayed.
Install
CH:21
Auto Setup
:
Manual Setup
CH:60
VCR Output CH : CH 60
:
CH:69
4 ,
Press the buttons, until the VCR Output CH
❷
option is selected.
5
Select the required output channel (CH21~CH69)
❿
by pressing the OK or buttons
➝ ➝ ➝
CH21 .. CH60 .. CH69
6
On completion, press RETURN to exit the menu.
Then tune your television again (see page 11).

Selecting the Colour Mode

Before recording or playing back a cassette, you can
select the required system standard.
Otherwise, the system automatically selects the
reception standard when you select AUTO.
➢
N When playing back a cassette, the standard is
automatically selected by the DVD-VCR.
N When you playback an NTSC-recorded tape on
this DVD-VCR make a setting on the colour
system according to your TV. If your TV is a
PAL system only TV, set NTPB.
If your TV is Multi System TV (NTSC 4.43
compatible), set NT4.43 and you can record
NT4.43.
1
After pressing the MENU, press the OK or
Result: The Setup menu is displayed.
2 ,
Press the corresponding buttons to select
❷
the User Set option.
❿
3
Press the OK or to select this option.
Result: The User Set menu is displayed.
(SV-DVD540/SV-DVD545)
User Set
Auto
PAL
Colour System : Auto

NICAM

: On B/W
IPC : On
VideoPlus Extend : Off
(SV-DVD440)
User Set
Auto
Colour System : Auto PAL
NICAM : On
B/W
IPC : On
4 ,
Press the corresponding buttons, until the
❷
Colour System option is selected.
❿
5
Press the OK or button to select
➝ ➝
Auto PAL B/W.
Auto When playing back a cassette, the system
standard is automatically selected by the
DVD-VCR.
B/W Black and White
6 On completion, press RETURN three time to exit
the menu.
ENG-16
NICAM
NICAM programmes are divided into 3 types. NICAM
Stereo, NICAM Mono and Bilingual (transmission in
another language).
NICAM programmes are always accompanied by a
standard mono sound broadcast and you can select the
desired sound. Please refer to page 24.
1
After pressing the MENU, press the OK or
Result: The Setup menu is displayed.
2
Press the corresponding
the User Set option.
❿
3 Press the OK or to select this option.
Result: The User Set menu is displayed.
❿
.
(SV-DVD540/SV-DVD545)
Colour System
NICAM
IPC
VideoPlus Extend
(SV-DVD440)
Colour System
NICAM
IPC
4 Press the corresponding
NICAM option is selected.
5 To... Press OK or
Mono mode Off is displayed.
Off: Only set at this position to
record the standard mono
sound during a NICAM
broadcast if the stereo
sound is distorted due to
inferior reception conditions.
NICAM mode On is displayed.
On: Normally set at this
position.
6
On completion, press RETURN three times to exit
the menu.

Intelligent Picture Control

The Intelligent Picture Control Feature allows you to
adjust the sharpness of the image automatically,
according to your own preferences.
1
During playback, press the MENU button on the
remote control.
Result: The Setup menu is displayed.
❿
.
2
Press the OK or
Result: The Setup menu is displayed.
,
❷ buttons to select
3
Press the corresponding
the User Set option.
4
Press the OK or
Result: The User Set menu is displayed.
(SV-DVD540/SV-DVD545)
User Set
: Auto
On
: On Colour System
Off
: On NICAM
: Off
IPC
VideoPlus Extend
(SV-DVD440)
User Set
: Auto
: On On
Colour System
: On Off NICAM
IPC
, buttons, until the
❷
5
Press the corresponding
IPC option is selected.
❿
, until...
6 Press the OK or
(intelligent picture control) option.
➢
When intelligent picture control mode is ON, the
sharpness of the image is adjusted
automatically.
7 To adjust the sharpness manually, press the
button to turn the IPC mode OFF.
8 ➛
Press the ,
displayed according to your preferences.
➢
If you do not press a button within ten seconds,
the PICTURE menu disappears automatically.
9
On completion, press the RETURN button again.
ENG-17
❿
.
,
buttons to select
❷
❿
buttons to select this option.
User Set
: Auto
: On
On
: On
Off
: Off
User Set
: Auto
: On
On
: On
Off
,
❷ buttons, until the
❿
buttons to select the IPC
❷
❿
buttons until the picture is