Surround Sound - Mercedes-Benz Audio 20 Operating Instructions Manual

Harman/kardon
114
To return to the menu: slide 5 the con-
X
troller.
To return to the basic menu: press the %
X
button briefly.
Adjusting the balance/fader
Balance adjusts the volume left and right.
Fader adjusts the volume in front and rear.
For the best sound, setting 0 is recommen-
ded.
Call up the sound menu (
X
Turn the controller until
X
in the center.
Slide 6 the controller.
X
To activate the menu for balance and fader:
X
press the controller.
To adjust the balance: slide 8 or 9
X
the controller.
To adjust the fader: slide 6 or 5 the
X
controller.
An image shows the sound focus set.
To return to the basic menu: press the %
X
button briefly.
® Logic 7 ® surround sound system
The
back.
X
X
X
X
page 113).
Y
or
Balance/Fader
is
X
X
X
For the optimum audio experience for all pas-
sengers when Logic7
balance settings should be set to the center
of the vehicle interior.
MP3 tracks should have a bit rate of at least
128 kbit/s.
Surround sound playback does not function
for mono signal sources, such as for AM radio
mode.
If radio reception is poor, e.g. in a tunnel, you
should switch off Logic7
erwise switch dynamically between stereo
and mono and cause temporary sound dis-
tortions.
Setting surround sound
Logic7
setting optimizes the sound play-
Call up the sound menu (
Turn the controller until
center.
Slide 6 the controller.
The left-hand rotary menu to switch sur-
round sound on and off is activated.
To activate Logic7: turn the controller until
On
is active.
To deactivate Logic7: turn the controller,
OFF
until is active.
To return to the menu: slide 5 the con-
troller.
To return to the basic menu: press the %
button briefly.
® is switched on, the
®
page 113).
Y
Logic7
is in the
, since it may oth-