Audio 20 Features; Activating Media Mode - Mercedes-Benz Audio 20 Operating Instructions Manual

Activating media mode

92

Audio 20 features

These operating instructions describe all
standard and optional equipment available
for your Audio 20 system at the time of pur-
chase. Country-specific differences are pos-
sible. Please note that your Audio 20 system
may not be equipped with all the features
described. This also applies to safety-relevant
systems and functions. Therefore, the equip-
ment on your Audio 20 system may differ
from that in the descriptions and illustrations.
Should you have any questions concerning
equipment and operation, please consult an
authorized Mercedes-Benz Center.
Activating media mode
General notes
There are several ways to activate media
sources using Audio 20.
The relevant sections of the Operator's Man-
ual describe the simplest way to activate a
media source.
This section describes all options for activat-
ing media sources.
Button activation
To call up the media menu: press the Õ
X
button.
The last media source you have set is dis-
played.
Press the Õ button again.
X
The menu appears with the available media
sources.
To select media sources: turn the controller
X
until the desired media source is in the cen-
ter. Press the controller.
The media sources are available in the fol-
lowing order:
CD
R
Memory card
R
Media Interface 1 and Media Interface 2
R
BT audio
R
If playable media files are found, they will
be played by Audio 20.
Switching on automatically
After an external media source has been con-
nected, Audio 20 will activate the corre-
sponding media mode automatically in the
case of CDs and SD cards. When using USB
devices, switch to the appropriate Media
Interface 1 or Media Interface 2 basic display.
External media sources:
Apple ® devices (e.g. iPhone
R
USB devices (e.g. USB stick, MP3 player)
R
CD
R
SD cards
R
via devices connected by Bluetooth
R
If playable media files are found, they will be
played by Audio 20.
If a media function is already switched on
i
in Audio 20, this will be interrupted and the
basic display of the newly connected
device will appear (except when using with
®
USB/iPod ).
If another function, such as navigation, is
operating, the basic display will not change.
Only the music from the newly connected
media source will play (except when using
with USB/iPod ® ).
Using the main function bar
® )
®