Connecting To An Audio System (Dolby Digital, Mpeg2 Or Dts Amplifier) - Samsung DVD-V6700- Instruction Manual

Connecting to an
Amplifier)
1
Using a coaxial cable (not included), connect the
DIGITAL AUDIO OUT (COAXIAL)
back of the DVD-VCR to the DIGITAL AUDIO IN
(COAXIAL) jack of the
2
Using video signal cable(s), connect the S-VIDEO
or COMPONENT OUT
DVD-VCR to the S-VIDEO or COMPONENT
jack of your TV as described on pages 13 to 16.
3
Turn on the DVD-VCR, TV, and Amplifier.
4
Press the input select button of the
select external input in order to hear sound from
the DVD-VCR.
Refer to your Amplifier's user manual to set the
Amplifier's audio input.
Notes
- When you connect the DVD-VCR to a DTS Amplifier and play a DTS disc, set the DTS to On in the
Audio Setup menu.
- Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause damage
to the speakers and your ears.
- Please set the audio in the menu screen according to the Amplifier. (See pages 53 ~ 54)
- The position of jacks may vary depending on the Amplifier. Please refer to the user's manual of the Amplifier.
C
O N N E C T I O N S
Audio System (Dolby digital, MPEG2 or DTS
jack on the
Amplifier.
jacks on the back of the
Amplifier to
IN
ENG-19
Coaxial Cable
(not included)
Dolby digital or
DTS Amp.