Connection To A Tv; Connecting To A Tv (Progressive) - Samsung DVD-V6700- Instruction Manual

Connection to a TV

The following shows examples of connections commonly used to connect the DVD-VCR with a
components.

Connecting to a TV (Progressive)

1
Using component video cables (not included),
connect the COMPONENT VIDEO OUT jack on
the rear of the DVD-VCR to the
jack of your TV.
2
Using the audio cables, connect from the AUDIO
OUT or LINE OUT AUDIO (red and white)
on the rear of the DVD-VCR to the
and white) IN jacks of your
Turn on the DVD-VCR and TV.
3
With the unit in Stop mode, set the Alt video
output to Component: Progressive in the Display
Setup menu (see pages
PROGRESSIVE button on the remote control.
The Progressive Scan mode prompt screen
appears. Then press ENTER and progressive
video will be output.
4
Press the input selector on your
control until the Component signal from the
DVD-VCR appears on your TV screen.
To see the progressive video output,
- Consult your TV User's Manual to find out if your TV supports Progressive Scan.
If Progressive Scan is supported, follow the TV User's Manual regarding Progressive Scan
settings in the TV's menu system.
- The position of the jacks may vary depending on the TV set.
Note
What is "Progressive Scan"?
Progressive scan has twice as many scanning lines as the interlace output method.
The Progressive scanning method provides clearer picture quality.
The Component Video jacks only output video from the DVD player. To view video from the VCR, you must have
the Video Out (yellow) jack connected.
C
O N N E C T I O N S
COMPONENT IN
AUDIO (red
TV.
) or press the
55 ~ 56
TV remote
jacks
White
Audio Cable
Red White
ENG-14
TV and other
Red
Blue
Green
Red
Component Cable
(not included)
Blue
Green
Red