Table of Contents
Advertisement
To Set a Section to Delete
6
Press the PLAY button.
- Title is play backed.
Use the UP/DOWN button to select Start icon, press the ENTER
7
button to delete at a desired time.
- The selected screen is displayed on the Range Setting window.
- Start time is displayed.
- Each time you press the start icon, the mark of the start position you want to
delete always changes.
Use the UP/DOWN button to select End icon, and then press
8
the ENTER button at the ending time to delete.
- Ending point picture and time are displayed on a large screen.
If you want to change the time of the Start or End position, select
9
the Cancel icon using the UP/DOWN button, and then press the
ENTER button.
- When both Start and End positions are set:
The end position is cancelled and the title is played back from the position where
it has stopped .
- When only the Start position is set:
The start position is cancelled and the title is played back from the beginning.
Select the Delete icon using the UP/DOWN button to
10
delete, and then press the ENTER button.
- The range which is set with start and end icons is deleted.
To make the edit menu disappear, press the EDIT button
11
again.
NOTE
• The time from the start point to the end point must be more than two seconds. Otherwise, it doesn't be deleted.
50
Advanced Functions
Advertisement
Table of Contents
