Table of Contents
Advertisement
Connections
Connecting the Audio Cables (DVD-R2000 + TV+Amplifier)
TV
DTV
Method3
Method1
Method4
Method2
AUDIO
DTS or Dolby Digital Decorder
Method 1 : 1. Use the TV Audio Input jacks
Connect the audio cables to the Audio Output L(left-white) and R (right-red) jacks on the back
of your DVD-R2000, and to the corresponding Audio Input (1 or 2 )jacks on your TV.
Method 2 : Use the Audio Amp Input jacks
Connect the audio cables to the Audio Output L(left-white) and R (right-red) jacks on the back
of your DVD-R2000, and to the corresponding Audio Input (1 or 2 )jacks on your Audio AMP.
Method 3 : How to connect the Audio when using component video (Y, P
and
B
P
)
R
Connect the audio cables to the Audio Output L(left-white) and R (right-red) jacks on the
back(component video output block) of your DVD-R2000, and to the corresponding Audio
Input jacks on your TV.
Method 4 : Use the DIGITAL RECEIVER AUDIO jacks
Connect the audio cable(COAXIAL or OPTICAL) between the Audio OUTPUT jacks on the
back of your DVD-R2000, and to the corresponding Audio Input jacks on your TV or DIGITAL
AUDIO RECEIVER.
18
Advertisement
Table of Contents
