Altec Lansing MZX221 Quick Start Manual

B L U E T O O T H E A R P H O N E S
1. Ma ke sure the following items are included in your package.
Carry Pouch
MZX221 Sports
Ear Tips
Bluetooth Earphones
4. Powering ON/Powering OFF Your Earphones:
-Press and hold the Power button for approximately 3-5 seconds to power on
your earphones. Your earphones will automatically connect with the last phone
they were paired with if they have previously been paired.
-Once powered on, you can press and hold
the Power button again for approximately
three seconds to power o your earphones.
NOTE: In order to save power, your earphones
for several minutes.
6. Wearing Your Earphones
For the best sound performance and a secure, comfortable fit, be sure that the
ear buds rest gently in your ear and drape around the back of your neck. Use the
ear tips that works best for you.
2. For a look at the various buttons and parts on your earphones, view the graphic
below.
1. Earloop
2. Ear Tip
3. Volume Up/Next Track
4. Power/Play/Answer
5. Volume Down/Previous Track
6. LED Indicator Light
7. Microphone
8. Charging Port
USB Cable
5. Pairing Your Earphones With a Bluetooth Phone
-Immediately after powering on your earphones, the LED Indicator
Light will alternately flash red and blue to indicate that your
earphones are ready to be paired.
~ 3-5 Seconds
-Go to the Bluetooth Manager on your phone.
Search Bluetooth devices and select "Altec mzx221" to start
connecting. Once paired, the LED Indicator Light will slowly flash
blue every few seconds.
7. Listening to Music
Play/Pause
Press the Power button to get music from your audio source to play or pause.
Next/Previous Song
Press and hold the Volume Up or Volume
Down buttons to advance to the next song
or go back to the previous one.
Increase/Decrease Volume
Repeatedly tap the Volume Up or Volume
Down buttons to increase or decrease the
volume.
NOTE: Music will automatically pause when
a call is dialed out or when there is an incoming
call. It will resume when the call ends.

Quick Start Guide

3. Charging: When charging, the LED Indicator Light will turn red. When charging is
complete, the LED Indicator Light will turn o . Your earphones can take up to two
1
hours to charge.
4
2
3 5
6
8
7
~ 3-5 Seconds
8. Using Your Earphones During Phone Calls
Last Number Redialing
Quickly tap on the Answer button twice and the last number that you dialed will be
redialed.
Answering an Incoming Call
To answer an incoming call, quickly
press the Answer button.
Ending a Call
To end a call, quickly press the Answer
button, and the call will be disconnected.
Adjusting Volume
By pressing the Volume Up or Volume
Down buttons you can increase or decrease
the volume of the phone call.
mzx221
Altec