Connecting To A Tv (Progressive) - Samsung DVD-FP580 Owner's Instructions Manual

C
O N N E C T I O N S

Connecting to a TV (Progressive)

- Connecting to your TV using Component video cables. The 480p resolution is possible with this
connection.
- What is "Progressive Scan"?
Progressive scan has twice as many scanning lines as the interlace output method
and provides better and clearer picture quality.
1
Using Component video cables (not included), connect the
COMPONENT VIDEO OUT jacks on the rear of the DVD player
to the COMPONENT IN jacks of your
2
Using the audio cables, connect the AUDIO (red and white)
OUT jacks on the rear of the DVD player to the AUDIO (red
and white) IN jacks of your
Turn on the DVD player and TV.
3
Set the Video Output to P-SCAN in the Display Setup menu.
(See pages 50 to 52)
You can also use the VIDEO SEL. button to change the
Output mode. (See page 16)
4
Press the input selector button on your
the Component signal from the DVD player appears on the TV
screen.
To see the progressive video output,
- Consult your TV User's Manual to find out if your TV supports Progressive Scan. If Progressive
Scan is supported, follow the TV User's Manual regarding Progressive Scan settings in the TV's
menu system.
- Depending on your TV, the connection method may differ from the illustration above.
TV.
TV.
TV remote control until
Video
RED
ENG-14
RED GREEN
BLUE
RED WHITE
Audio Cable
(Included)
Component cable
WHITE
(not included)
RED GREEN
BLUE