Samsung SL600 User Manual page 37

Self-timer ( ) / Right button
Ê Selecting the self-timer
1. Select a Recording mode with the
exception of Voice recording mode.(p.21)
2. Press the Self-timer / Right (
button until the desired mode indicator
displays on the LCD monitor. A 10 second,
2 second, Double self-timer or Motion timer
icon appears on the LCD monitor.
3. When you press the shutter button, the
picture will be taken after the specified
time has elapsed.
Ê Self-timer mode indicator
Icon Mode
10SEC Pressing the shutter button will allow an interval of
self-timer 10 seconds before the image is taken.
2SEC Pressing the shutter button will allow an interval of
self-timer 2 seconds before the image is taken.
A picture will be taken after about 10 seconds and
2 seconds later a second picture will be taken.
Double
When using the flash, the 2-second
self-timer
self-timer may be delayed for longer than 2 sec-
onds depending on the flash charging time.
The camera detects the subject's movement 6
Motion
seconds after pressing the Shutter button, and the
Timer
picture is taken when the movement is stopped.
036
)
[Selecting the 10 SEC
self-timer]
Description
Ê Motion Timer
Motion
Pressing the Shuter button after
setting the Motion Timer
Detecting the subject's movement
No movement is detected
Ê The Motion Timer flows are as followings. (Movie mode excluded)
Selecting the Motion Timer à Pressing the Shutter button Ã
Confirming the composition (Within 6 sec.)
tion (Swing your hands fully)
(Do not move) Ã Taking an image (after 2 sec.)
*1: The camera detects the subject's movement 6 seconds after pressing the
Shtter button, so confirm the composition within 6 seconds.
*2: Move your body or hands fully.
In the following cases, the Motion Timer may not operate.
å The focus distance is over 3m.
å The exposure is too bright or dark
å In backlight conditions.
å The movement is insignificant
å The movement is detected
beyond the center part (50%) of
the sensor where the movement
is recognized.
å If the camera doesn't sense any
movement for 30 seconds, or the
camera doesn't sense stillness
after sensing movement.
Icon & Self-timer lamp
Blink (1 second interval)
Blink (0.25 second interval)
Turn on and the image is taken
after 2 seconds
*1
à Starting the detec-
*2
à Stopping the detection
The detection range of
Motion Timer